EBLOCK Thin-bed Mortar EBT-104 (Adhesive)

EBLOCK Thin-bed Mortar EBT-104 (Adhesive)

  • Largest Particle Size 1.25 mm
  • Consistency: 190-220 mm
  • Setting time: > 200 phút
  • Correction time > 10 phút
  • TCVN 9028:2011
  • Description
  • Additional information


EBLOCK Thin-bed Mortar EBT-104 is a specialized product developed for Autoclaves Aerated Concrete (AAC) AAC EBLOCK, AAC PANEL. Minimize wall crack, increase adhesion, and create joints. Main components: Cement, sand, and polymer additive.

EBLOCK Thin-bed Mortar EBT-104 is manufactured on an industrial scale according to European standards, adhere to strictly monitoring processes to ensure product quality, and limit the risk of mixing at work.


EBLOCK Thin-bed Mortar EBT-104 is a specialized product is compatible with and suitable for Autoclaved Aerated Concrete (AAC) Block, which helps to increase the adhesion, bonding and ensure technical requirements of EBLOCK lightweight AAC block wall system.

EBLOCK Thin-bed Mortar EBT-104 is designed to have high flexibility & adhesion, ability to keep consistency, appropriate correction time, helping create a thin mortar seam to save materials and labor cost.

Packing Method:

EBLOCK Thin-bed Mortar EBT-104 is packed in a moisture-proof paper bag, 25kg per bag to facilitate transportation, storage, and use.

Specification Technical:


(TCVN 9028:2011)

Unit Value
Largest Particle Size mm 1.25
Consistency mm 190-220
Water Retention % > 90
Setting time mins > 200
Correction time mins > 10
Chlorine Ion Content % < 0.1
Minimum Compressive Strength (after 28 days) MPa 7.5
Adhesive strength MPa

≥ 0.4

The specifications comply with TCVN 9028: 2011 standards and quality certificates provided by the factory.

Additional information

Weight 25 kg

Mixing the mortar according to the water ratio indicated on the package, stir the mortar powder with a paddle (can use a larger mixer).

Usage norm:

 Wall thickness (mm) Kg/m² wall m² wall/ bag 25kg
75 2.25 11.1
100 3 8.3
150 4.5 5.6
200 6 4.2


Using mortar after mixing about 120 minutes and depends on weather conditions (temperature, wind, humidity ...). Mix again after 30 minutes of non-use.

The recommended shelf life of 6 months from the date of manufacture is indicated on the package, provided that the product is stored in a dry, cool, and intact packaging. Do not stack more than 10 bags.


The product contains cement and is alkaline, which may cause irritation in contact with the body. Gloves and goggles should be used when applying the product to minimize direct contact with skin.
Refer to labor safety materials at the construction site.


The information contained in this document is based on the results of research, experiments and actual construction at the site over many years.
EBLOCK mortar products when delivered to the site are considered a semi-finished product. We recommend that the mixing and installation at the site comply with the specifications specified on the packaging and construction documentation.